From requirement to prototype, from prototype to detailed design. One model, with the whole supply chain.
Forge sectors
Aerospace and space
Automotive and mobility
Mechanical engineering and machinery
Advanced manufacturing
Plant and process engineering
Energy and renewables
Shipbuilding and maritime
Medical and pharmaceutical
Artisans and small producers
Aerospace and space
Automotive and mobility
Mechanical engineering and machinery
Advanced manufacturing
Plant and process engineering
Energy and renewables
Shipbuilding and maritime
Medical and pharmaceutical
Artisans and small producers
rev. CMRLMSG
A single model Requirements, drawings and revisions linked, shared with every partner.
CNC machiningChosen
Surface treatmentsProposed
MouldingNot suitable
The right suppliers Chosen on real capabilities, inside the project.
Rev. CIn review
Rev. BApproved
Rev. AApproved
Supplier A only sees the bracket
Protected versions and IP Everyone sees their own part. Every approved version leaves a record.
The problems, in figures.The solutions, in one project.
Time lost searching32%Of an engineer's time, spent looking for information and redoing what already existed.One version, the right oneThe project lives in one place, always up to date.
Changes found late×100A change found in production costs a hundred times one made on the drawing.Discrepancies, spotted at onceA discrepancy costs less on the day it appears.
Data, not design50 daysEvery year, per engineer, spent managing data instead of designing.Everything linkedRequirements, drawings and revisions are linked. No files by email.
One project, the whole supply chain.Whatever stage you start from.
Available on a project basis
From the idea, the right requirements
Start from a need: Forge turns it into clear requirements, shared with whoever will build it.
One requirement, for everyone · The same for you and your suppliers, with version and approval.
Feasibility, before you spend · Constraints and risks on the table from day one.
The right partners, from the start · Chosen on real capabilities, not word of mouth.
Requirements · Support bracketAgentShared
R-01Maximum load 2.4 kNApproved
R-02Weight under 1.2 kgIn review
R-03Aluminium 6082 or equivalentProposed
R-04Frame interfaceApproved
R-02 and R-01 clash. With the current thickness the weight goes over the limit: a choice is needed before the drawings.
A person decidesOpen the comparisonInvite the supplier
A single model
Requirements, drawings and revisions linked, with every partner.
One version, the right one · Tracked revisions: who changed what.
Everything linked · Every drawing knows which requirement it comes from.
One requirement, for everyone · The same for client and suppliers, with version and who approved it.
Project modelNew product
FrameApproved
BracketIn review
CoverApproved
Circuit boardIn progress
A single model: everyone sees their own part
Discrepancies, spotted at once
Agents compare revisions and specifications, and flag them to whoever decides.
Discrepancies caught at once · Agents compare revisions and specifications.
The impact of a change, at once · What changes if a tolerance changes.
Alongside your tools · Drawings and requirements stay where they are: Forge links them.
Revisions · Bracket
Rev. B · approvedRev. C · from the supplier
Discrepancy. The bracket thickness in Rev. C is outside the design tolerance. It affects R-04, the sub-assemblies and the schedule.
A person decidesOpen the comparisonNotify the supplier
Each one their own part
Every contribution stays with whoever made it. Guests invited to their part, revocable.
The right suppliers · Chosen on real capabilities: past work, certifications, equipment.
Guests in the project · Invited to their part, revocable.
The supplier package · Drawings and requirements for their part, view only.
Permissions
RequirementsDrawingsCostsElectronics
You, the client
Supplier A
Supplier B
Supplier C
Package for Supplier C: R-05 · Electrical interface, Wiring diagram, View only
Every contribution stays with whoever made it. Every access leaves a record
The whole supply chain, in one project
Technical and operational status together; suppliers chased for you.
Technical and operational status, together · The project and the schedule on the same screen.
Chases suppliers for you · Late deliveries, documents and replies.
Evidence ready · Who approved what, and against which specifications.
Schedule
MarAprMayJunJul
Design
Prototype
Testing
Production
Today
Testing at risk. The bracket revision moves testing: if nobody decides this week, production slips.
Changes and delays, as they happenOpen the decision
From prototype to detailed design.On the same model.
A prototype shows it works. Detailed design shows it can be built: deliverables, stages, verification and tendering in one place, EPC projects included.
On a project basis, starting from your case
Every deliverable has its status
Diagrams, datasheets and specifications in a single register: who issued them, at which revision, where they stand.
A single register · The same for every company on the project.
Tracked revisions · There is one latest revision, and you can see who approved it.
Linked to requirements · Each deliverable says which requirement it meets.
Deliverables · Pump skidAgentShared
P-01Process diagram rev. CApproved
D-14Pump datasheet rev. BIn review
S-07Valve specification rev. BApproved
L-03Load list rev. ADraft
D-14 is in review. The new flow rate affects P-01 and S-07: they need a revision too.
A person decidesOpen the impactRequest the revision
A stage closes, and stays put
From concept to detailed design, each stage sets a baseline. From there, a change goes through a decision.
One baseline · Everyone works on the same one.
Changes with a decision · Whoever holds technical authority on the project decides.
The impact, before approving · What the change affects: deliverables, requirements, supplies.
Project stages
JanMarMayJulSep
Concept
Basic
Detailed
Tender
Today
Baseline set at the end of basic design. The flow rate change comes later: a decision is needed.
Technical authority decidesOpen the change
Whoever verifies works on the same data
The third party or the client reads the project in view-only mode, with no copies. Every finding stays tracked until it is closed.
View only · No files going round.
Tracked findings · Opened, discussed and closed with their evidence.
Everyone their own part · Whoever verifies sees what they have to verify.
Findings · Independent verificationThird partyView only
V-07Line design pressureOpen
V-06Flange classBeing answered
V-05Seal materialClosed
V-07 was opened by the verifier and affects D-14. It closes with the answer and its evidence.
Every finding stays trackedOpen the findingAnswer
The tender package comes from the project
Specifications, datasheets and acceptance criteria come out of the model, already aligned with the requirements.
One package per supply · Only what a bidder needs.
Acceptance criteria · What delivered means, written beforehand.
Comparable bids · Everyone answers the same requests.
Tender package · PumpsSupply 03
Specification S-07 · rev. BIncluded
Datasheet D-14 · rev. AIncluded
Acceptance criteriaIncluded
Cost estimateRestricted
The package takes the latest approved revision of each deliverable.
Only what a bidder needsPreviewInvite suppliers
When the work ends, the dossier is already there
What was built, the evidence and the decisions are collected as the project moves on.
As built · Each deliverable at its latest revision.
Choices and evidence · Each decision with who made it and why.
Ready for the operator · The handover starts from here.
Final dossier · Pump skidAs built
Deliverables at their latest revisionComplete
Tests and commissioningComplete
Decisions and waiversComplete
Material documentsBeing collected
Collected as the project moves onExport the dossier
NewAvailable on a project basis
Tell us about your project
01
Check Feasibility
Tell us about the project: sector, stage, companies involved. We'll tell you whether and how Forge can take it on.
02
The project, set up with the Ida team
Requirements, model, partners and permissions: who sees what, from day one.
03
From requirement to prototype, through to detailed design
With the assistant in the project, and someone from the team when you need them.